Name
|
Description
|
Attributes
|
ApplyTrackingDataConstraintChecks
|
Specifies whether to apply range validation to measurements associated with the GroundAntenna.
|
Type: Variable
Access: Read/Write
|
DeclaredName
|
The name of the object as declared.
|
Type: String
Access: Read-Only
|
DisplayName
|
The name displayed for this object in output windows such as views, plots, and reports.
|
Type: String
Access: Read/Write
|
FrequencyRampingSchedule
|
This property contains the frequency ramping information to be used for processing DSN data.
|
Type: FrequencyRampSchedule
Access: Read/Write
|
ID
|
The ID used to associate tracking measurements with this antenna.
|
Type: String
Access: Read/Write
|
LimbLimit
|
The elevation angle dictating whether a whole observation is determined to be valid or not. Whole observations with an elevation less than this limit are marked as invalid.
|
Type: Variable
Access: Read/Write
Units: deg
|
ObjectId
|
The unique identifier for the object.
|
Type: Variable
Access: Read-Only
|
ObjectType
|
The type of the object.
|
Type: String
Access: Read-Only
|
OD
|
This property contains the OD settings for all the GroundAntenna properties that can be estimated.
|
Type: GroundAntennaODProperties
Access: Read-Only
|
RangeRateAveragingInterval
|
The time interval over which the Range-Rate measurements are averaged. When using instantaneous data, this interval should be set to 1 millisecond.
|
Type: TimeSpan
Access: Read/Write
Units: s
|
ReceiveFrequency
|
The antenna downlink frequency. Note: This property is needed only if the antenna object is used for Orbit Determination and the associated tracking data file(s) are of type ASCII format. For UTDF and DSN tracking formats, this property holds the value of the transmit/receive frequency as obtained from the tracking data file during execution of the Orbit Determination object.
|
Type: Variable
Access: Read/Write
Units: Hz
|
TransmitFrequency
|
The antenna uplink frequency. Note: This property is needed only if the antenna object is used for Orbit Determination and the associated tracking data file(s) are of type ASCII format. For UTDF and DSN tracking formats, this property holds the value of the transmit/receive frequency as obtained from the tracking data file during execution of the Orbit Determination object.
|
Type: Variable
Access: Read/Write
Units: Hz
|
UseLimbLimit
|
Flag indicating whether or not to mark the observation invalid, based on the elevation of the observation. If the elevation is not in use, then this setting is ignored.
|
Type: Variable
Access: Read/Write
|
UseRampingData
|
Use ramping data to determine the time-varying frequency over the duration of the transmission for DSN contacts.
|
Type: Variable
Access: Read/Write
|
